Product Series
12PSDW-B Diesel Injection Pump Test Bench
Diesel engine parts (nozzle, plunger, delivery valve, head Rotor, injector, fuel pump and other accessories) 2, Injection pump test bench 3,auto tools 4 Auto parts 5, special vehicles 6 , Turbocharger.......
Keywords:
Series:
Product Details
- Power requirement：
- Power supply capacity requirement is large enough，The cross-sectional area of the power supply wiring of the equipment is as follows:：
|
POWER |
Wiring cross-sectional area (copper wire) |
Wiring length (m) |
|
7.5KW |
≥2.5mm2 |
<15m |
|
11KW |
≥4mm2 |
<15m |
|
15KW |
≥6mm2 |
<15m |
|
18.5KW |
≥10mm2 |
<15m |
|
22KW |
≥12mm2 |
<15m |
|
37KW |
≥15mm2 |
<15m |
|
45KW |
≥20mm2 |
<15m |
Equipment above 22KW should have a foundation to be installed.
-
- The equipment must be reliably grounded! The grounding wire should be connected to the special grounding device of the building. It is forbidden to connect the grounding wire to the water pipe or gas pipe.
- Lines must be installed by professionals in accordance with national wiring rules。
- The fixed line must be equipped with an air switch with sufficient power supply capacity; if the AC voltage is unstable, the device needs to be connected to the power regulator.
- Regularly check the power cord for damage and the power plug or socket for dust accumulation.
- If the equipment is abnormal or an abnormal sound, smell or smoke is emitted, stop using it immediately and turn off the air switch.
- The power supply must be turned off when not in use.
- Environmental requirements:
The test bed is suitable for ambient temperature: 5 °C - -30 °C. Keep away from flammable, explosive materials and fire sources, and ensure that the equipment is well ventilated; long-term continuous work should be avoided.
- Safety instructions
- Please read this manual carefully before using the device. If you have any questions or problems, please contact your dealer or manufacturer.
- Please contact the after-sales service personnel after the equipment fails.
- Non-professionals should not operate this equipment. It is forbidden for minors to operate this equipment.
- The device must be installed and fixed before it can be powered on.
- Do not operate the electrical switch with wet hands.
- The part related to the equipment safety and measurement standard system is strictly prohibited to be modified. Otherwise, the company is not responsible for the consequences caused by this.
Special statement:
Our company reserves the right to make further improvements to the appearance and internal structure of the product, and is subject to change without notice.
Ⅰ.FEATURES
By employing high performance/low noise inverter and using Bosch advanced techniques Our testbench has had more and more advantages, such as, wide range of adjustment speed, stable speed, large torque outputting, frequency control, digital display and automatic temperature control technology easy operating and so on. This test bench used digital indicators to display speed, counting, test oil temperature, pressure/vacuum and advance angles.
The test bench of 12PSB series in it’s 12 cylinders with 5.5/7.5/11/15/18.5/22kw motor, can start and test both in-line and rotary fuel injection pumps, for example, Ⅰ, Ⅱ, Ⅲ, A, B, P, Z, VE pumps and so on, by employing the suitable accessories.
1.Main function
1.1. Measurement of each cylinder delivery at any speed.
1.2. Test point and interval angle of oil supply of injection pump.
1.3. Checking and adjust the mechanical governor.
1.4. Checking and adjusting the distributor pump.
1.5. .Experiment and adjusting of behavior of supercharging and compensatory device.
1.6. Measurement of oil return of distributing pump
1.7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
1.8. Measurement of the internal pressure of distributor pump.
1.9. Checking of the advance angle of advance device.(on request)
1.10. Checking the sealing of injection pump body
1.11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
1.12. Checking the travel of stroke (on request)
Ⅱ.TECHNICAL PARAMETERS
1.CHARACTERISTICS
1.1. Changing frequency changing rotational speed
1.2. Low fall of rotational speed and high output torque
1.3.High measurement precision;
1.4. The functions of over voltage, overload and short circuit protection;
1.5. Ten classes Rotation speeds presetting;
1.6. Constant temperature controlled;
1.7. Ultra low noise;
1.8.Operating position: arbitrary side of the two work sides of the test stand;
1.9.Rotation speed, count, temperature, air pressure, advance angle and rack travel are measured and controlled by computers in real time, then displayed by 17″CRT or on request (17 LCD touch screen).
1.10.Built-in air resource;
1.11.All data can be made into reports and printed;
1.12.Automatically generating and displaying speed characteristics curve;( tooth bar stroke)
1.13.The data of the pumps can be saved, modified and obtained pump database;
1.14.It is very easy to find the data of the pumps in pumps database;
1.15.Windows operating system.
2.TECHNICAL DATA
1, Diesel engine parts (nozzle, plunger, delivery valve, head Rotor, injector, fuel pump and other accessories) 2, Injection pump test bench 3,auto tools 4 Auto parts 5, special vehicles 6 , Turbocharger.......
Production process using advanced computer control and digital display systems, production technology, strong technical force . High quality, high technical performance, with micro-controller and digital functions. Products are sold more than 100 countries and regions of all world .
Our spirit is "excellent quality, excellent price, excellent service " three excellent operating principle of dedication to customer service, for the development of the internal combustion engine testing industry Chinese and abroad to make greater contributions.
FAQ
Main business of Dongtai Machinery
1, Diesel engine parts (nozzle, plunger, delivery valve, head Rotor, injector, fuel pump and other accessories) 2, Injection pump test bench 3,auto tools 4 Auto parts 5, special vehicles 6 , Turbocharger.......
Intelligent manufacturing
Company use advanced production and processing equipment and full set of production technology and product design software . Produce of Auto testing and test equipment with the world advanced level
Production process
Production process using advanced computer control and digital display systems, production technology, strong technical force . High quality, high technical performance, with micro-controller and digital functions.
Sales & Service
Products are sold more than 100 countries and regions of all world .Our spirit is "excellent quality, excellent price, excellent service " three excellent operating principle of dedication to customer service
Previous Article
Next Article
Previous Article
Next Article
Contact & Services
Post code: 271000
Add: High-Tech Zone, Taian, Shandong, China.
